register the bd remote

I canyt seem to get the bd remote to register to the ps3

That's odd. Any problems registering the controllers? If not, could be a faulty remote.

I'd try the remote with a second console someone you know perhaps has to see if it is. If the remote doesn't work with a second console, it's probably faulty, so take it back to the shop.

If it does work with the second console, then not sure what the problem could be.

__________________


PS3 60gb - 2x SixAxis pads - BD Remote - Logitech Cordless Desktop EX 110 - 4Gamers Blue Neon USB Stand

Games - Resistance Fall of Man, Half Life: The Orange Box, Uncharted: Drake's Fortune, Gran Turismo 5: Prologue, Grand Theft Auto IV, Assassin's Creed, Tom Clancy's Rainbow Six Vegas 2

A little information would help, then we could try to deduce the problem here.

Hmm... I thought the remote registration was for say, a DVD type of remote not the controller. The instructions tell you how to set up the controller as firtst controller, second controller and so on.

Just a little info here.

I went and exchanged my BD remote for a new one. Brought it home and still couldn't get it to register to the PS3.

With a little persistance I got it registered to the PS3 and this is how it finally worked.

I held the PS button on the wireless six axis controller while I was in the BD remote registration screen. and when the screen to shut of Controller or shut off the PS3 came up I shut off the Controller, as soon as I did that I was returned to the registration screen and held Start and Enter buttons on the BD Remote at the same time as instructed in the registration instructions, within 3 seconds it started to register to the PS3. The remote is working now and it has taken the number 7 spot for control devices. Very odd because the directions do not say anything about following that procedure, but it now is working well. Hope this helps anyone else having a similar problem.

Thank you for my thread replys.

Sounds very strange. I never had any other that trouble when I registered mine. Also, yes it will take up number 7 as that is reserved for the BD remote only. Was a strange way around the problem but glad you got it sorted in the end

The instructions in the leaflet are wrong. Go to accessories settings/register bd remote. Press the start button and the enter button labelled "ENTER" surrounded by the arrow keys simultaneously, as you are told to do onscreen. The x button serves as enter on the controller, and the enter key on the PS3 Logitech keyboard is also labelled x, but that is not what is meant with regard to the bd controller. I also had my keyboard turned off for this - it might help to turn off other bluetooth stuff while doing this.

For my experience, it was just the opposite. I could not get the remote to register pressing the Start and the Enter key that was surrounded by the arrows. But once I pressed the Start and the "X" button, the remote registered immediately and works great. So try it both ways.

Douchebag? Oh, that one hurt.

Thanks Ivanfleet! Your advice to turn off my sixaxis controller helped fixe mine too however I also had to unplug the usb cord from my sixaxis controller to get it to finally register . Thanks. I too hope this helps others.
JT